Mooring Buoys

Hot-dipped galvanized steel. Blue stripe is reflective for nighttime visibility. Puncture proof and almost indestructible. Three-Year flotation warranty on all Taylor hard skin buoys..Read More

Ring buoys are essential for lifeguards. They can go places that lifeguards can't. They are excellent water safety tools for boats and pools. Make sure that you never get caught in a situation where these are needed without one. For more Choices go to MASTERLIFEGUARD.com..Read More

..Read More

Q: What is a Butt Buoy? A: A Butt Buoy is an anchor marker buoy, with a sense of humor. Q: Is the Butt Buoy Inflatable? A: Yes, the Butt Buoy is inflatable, for easy storage. Q: Can the Butt Buoy be left inflated? A: Yes, the Butt Buoy is made of high quality polyvinyl chloride, and can be left inflated. It is best to remove the bathing suit during storage, so It stays clean. Q: How do I inflate my Butt Buoy? A: The Butt Buoy is best inflated with a hand pump. (like a basketball pump, also remember to moisten the needle!) Q: Can the Butt Buoy be inflated with an air compressor? A: Yes, but it is not recommended, as the Butt Buoy inflates rather quickly. And you never want to over inflate. Q: What happens if I over inflate my Butt Buoy? A: The Butt Buoy will lay on its side and will not float as it is intended. Q: How much should I inflate my Butt Buoy? A: The Butt Buoy floats best when it is barely inflated. The Bottom of the Butt Buoy should look flat. Like the bottom of a rubber ducky. Q: How should I clean my Butt Buoy? A: Your Butt Buoy should be cleaned with a mild detergent and warm water. (Simple Green works great!) Q: Are there any other uses for my Butt Buoy? A: Yes, people have used the Butt Buoy to hold their swimming pool thermometers in their swimming pools and spas. Q: What size is the Butt Buoy? A: The Butt Buoy is approximately 12 inches in diameter and 8 inches tall. Q: Does the Butt Buoy come with a bathing suit? A: Yes, you get your choice of color when you order. You can also customize your buoy with any suit!..Read More

USCG Approved. Features Tough, Yellow Vinyl Fabric With Beaded Edges Over Closed-Cell Plastic Core. Will Not Rot Or Mildew. Stainless Steel Hardware.
Size: Horseshoe
Size: Horseshoe
Part Number(s): CAL 920 CAL-920 CAL_920 CAL920 58-920..Read More

• Get your butt in the water with these playful and attention grabbing buoys!
• Butt Buoys are REAL marker buoys with a REAL sense of humor!
• The PERFECT gift for the guy who has everything - it's a real "Crack-Up!"
• Guaranteed to make your boat or PWC stand out in a crowd!
• This is the attention-getting boating novelty that is sure to get a laugh!

Q: What is a Butt Buoy? A: A Butt Buoy is an anchor marker buoy, with a sense of humor. Q: Is the Butt Buoy Inflatable? A: Yes, the Butt Buoy is inflatable, for easy storage. Q: Can the Butt Buoy be left inflated? A: Yes, the Butt Buoy is made of high quality polyvinyl chloride, and can be left inflated. It is best to remove the bathing suit during storage, so It stays clean. Q: How do I inflate my Butt Buoy? A: The Butt Buoy is best inflated with a hand pump. (like a basketball pump, also remember to moisten the needle!) Q: Can the Butt Buoy be inflated with an air compressor? A: Yes, but it is not recommended, as the Butt Buoy inflates rather quickly. And you never want to over inflate. Q: What happens if I over inflate my Butt Buoy? A: The Butt Buoy will lay on its side and will not float as it is intended. Q: How much should I inflate my Butt Buoy? A: The Butt Buoy floats best when it is barely inflated. The Bottom of the Butt Buoy should look flat. Like the bottom of a rubber ducky. Q: How should I clean my Butt Buoy? A: Your Butt Buoy should be cleaned with a mild detergent and warm water. (Simple Green works great!) Q: Are there any other uses for my Butt Buoy? A: Yes, people have used the Butt Buoy to hold their swimming pool thermometers in their swimming pools and spas. Q: What size is the Butt Buoy? A: The Butt Buoy is approximately 12 inches in diameter and 8 inches tall. Q: Does the Butt Buoy come with a bathing suit? A: Yes, you get your choice of color when you order. You can also customize your buoy with any suit!..Read More

Ideal for larger boats and rafting, Tuff End™ buoys feature heavy-duty seamless construction. Fender ends are made from injection-molded vinyl tested to an industry-leading 2000 psi tensile strength. Large line holes accept standard shackles. The curved design hole prevents chafing. Trivalve™ located on the side of the buoy for easy inflation with a football needle or compressor...Read More

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

• HUGE FLOATATION BASE - 12" high x 30" diameter size assures upright floatation
• 2" WIDE ALUMINUM BAND - Protects base of buoy from jet-skis and boat crashes (optional)
• CJ-37 ROCK HARD OUTER SHELL - Resists the hardest blows - almost indestructible!
• CHOOSE DECALS/DAYMARKS - E-mail us after purchase to request daymarks other then the one pictured.
• ABOVE WATER LINE - 56"

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

• Molded from tough UV protected polyethylene
• One piece seamless construction
• Sandblasted finish allows the buoy to be easily painted for identifying
• Three year flotation warranty
• 460 lbs buoyancy

Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion...Read More

• HUGE FLOATATION BASE - 12" high x 30" diameter size assures upright floatation
• 2" WIDE ALUMINUM BAND - Protects base of buoy from jet-skis and boat crashes (optional)
• CJ-37 ROCK HARD OUTER SHELL - Resists the hardest blows - almost indestructible!
• CHOOSE DECALS/DAYMARKS - E-mail us after purchase to request daymarks other then the one pictured.
• ABOVE WATER LINE - 45"

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

• This Pelican® pedal boat vinyl mooring cover is easy to install and designed to help protect your boat from the elements.
• Heavy Duty and breathable material
• Elastic cord in the bottom hem for secure fit

Keep your pedal boat clean while not in use. Easy to use with elastic band around the bottom to keep the cover snug on the boat...Read More

Sur-Mark Buoys - --Sur-Mark™ regulatory buoys are molded from tough UV protected polyethylene. One-piece seamless construction, internal concrete ballast, recessed galvanized eye; stands upright for storage. Buoys include orange marking tape, Color labels (Sold Separately).F E A T U R E S- Col. Dia. - 10" Large Ring Dia. 18" Approx Buoyancy (lbs.) - 40 Visible Height Above Waterline 39"..Read More

• Great marker for lines

5" Marker Buoy is great for marking lines...Read More

Q: What is a Butt Buoy? A: A Butt Buoy is an anchor marker buoy, with a sense of humor. Q: Is the Butt Buoy Inflatable? A: Yes, the Butt Buoy is inflatable, for easy storage. Q: Can the Butt Buoy be left inflated? A: Yes, the Butt Buoy is made of high quality PVC, and can be left inflated. It is best to remove the bathing suit during storage, so It stays clean. Q: How do I inflate my Butt Buoy? A: The Butt Buoy is best inflated with a hand pump. (like a basketball pump, also remember to moisten the needle!) Q: Can the Butt Buoy be inflated with an air compressor? A: Yes, but it is not recommended, as the Butt Buoy inflates rather quickly. And you never want to over inflate. Q: What happens if I over inflate my Butt Buoy? A: The Butt Buoy will lay on it's side and will not float as it is intended. Q: How much should I inflate my Butt Buoy? A: The Butt Buoy floats best when it is barely inflated. The Bottom of the Butt Buoy should look flat. Like the bottom of a rubber ducky. Q: How should I clean my Butt Buoy? A: Your Butt Buoy should be cleaned with a mild detergent and warm water. (Simple Green works great!) Q: Can I change the bathing suit on my Butt Buoy? A: Yes, you can order additional suits at Butt Buoy.com Q: Are there any other uses for my Butt Buoy? A: Yes, people have used the Butt Buoy to hold their swimming pool thermometers in their swimming pools and spas. Q: What size is the Butt Buoy? A: The Butt Buoy is approximately 12" in diameter and 8" tall. Q: Does the Butt Buoy come with a bathing suit? A: Yes, you get your choice of color when you order! You can also attach any suit for a custom look!..Read More

SUR MOOR T3C BUOYS are hard skinned with 2" tube-thru-the-center construction (Model 46374 has a 3" tubular hole.) Ideal when non-standard oversized hardware or extra heavy chain is being used. Design allows boat to be tied directly to mooring chain for added safety and security. Foam filled. Blue-striped. Diameter - 24". Buoyancy - 240 pounds. ( See item: # TAY33025 for Mooring Collar , #TAY33001 for Rope Nest, #TAY46190 for Buoy Boot.)..Read More

Molded from the same polyethylene as our life rings, and filled with closed cellular foam for long life under the most extreme marine conditions. The shell is resistant to fire, oil and gas, and is UV stabilized...Read More

• Feature large line holes that will accept most ropes and standard shackles
• Injection molded ends tested to 2000 psi tensile strength
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless construction, the strongest in the industry

TUFF END INFLATABLE VINYL BUOYS are excellent for fenders, mooring buoys or markers. Eye end of fender is solid vinyl for extra strength. Built-in bivalve for easy inflation/deflation. Bivalve offers needle valve for football-type hand pump inflation or unscrews and removes for large aperture pumps or quick deflation. Patent pending. Recommended inflation is 2 psi. Diameter - 18". Buoyancy - 100#. Orange...Read More

• Gives years of protection shielding out rain and debris.
• The shock cord gives a snug, tight fit.
• Marine grade polyester blend

The KL Industries® Mooring Cover for the Sun Dolphin 3 provides years of protection, shielding out rain and debris. Made of a marine grade polyester blend. The elastic cord provides a snug, tight fit...Read More

• HUGE FLOATATION BASE - 12" high x 30" diameter size assures upright floatation
• 2" WIDE ALUMINUM BAND - Protects base of buoy from jet-skis and boat crashes (optional)
• CJ-37 ROCK HARD OUTER SHELL - Resists the hardest blows - almost indestructible!
• CHOOSE DECALS/DAYMARKS - E-mail us after purchase to request daymarks other then the one pictured.
• ABOVE WATER LINE - 47"

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

The ideal buoy or fender for a variety on applications...Read More

The Sur-Moor taper shape design places more floatation area at the waterline creating a higher visibility mooring. The hard-skin polyethylene shall is UV protected to resist the weathering effects of sunlight and is foam filled to positively displace water. Available in the Tube-Through-The-Center design with blue reflective striping...Read More

• High Density foam assures lasting durability.
• All hardware is hot-dipped galvanized medium carbon steel.
• Eyebolts are molded into buoy, resulting in no loss of floatation.
• Rubber bumpers give added protection in contact.
• Coated with an exterior coating that resists extreme weathering, most chemicals and fuels.

22" Diameter / 44" Height / 2" Tube / 414lb Buoyancy..Read More

EasyMooring is an easy to use device engineered exclusively to make the mooring of pleasure craft to buoys faster, easier, and safer. Instead of engaging in tiring and complex maneuvers with a boot hook and trusting a soggy and rotten buoy line, EasyMooring allows you to connect directly to a mooring buoy's eye bolt in two simple steps.First, press the button on the EasyMooring's handle and shift the handle forward to open the hook. Second, insert the open hook into the buoy's eye-bolt and close the hook by shifting the handle backwards until the button clicks. Please follow the appropriate precautions while using EasyMooring. Inside a port: with rough sea, undertow, or wind above 15 knots, you should reinforce the mooring with a safety line. In an open harbor: never leave your craft unattended if connected only with our device, but always use an extra safely line Ensure that the mooring line runs under any railings, to prevent inadvertent damage...Read More

Q: What is a Butt Buoy? A: A Butt Buoy is an anchor marker buoy, with a sense of humor. Q: Is the Butt Buoy Inflatable? A: Yes, the Butt Buoy is inflatable, for easy storage. Q: Can the Butt Buoy be left inflated? A: Yes, the Butt Buoy is made of high quality polyvinyl chloride, and can be left inflated. It is best to remove the bathing suit during storage, so It stays clean. Q: How do I inflate my Butt Buoy? A: The Butt Buoy is best inflated with a hand pump. (like a basketball pump, also remember to moisten the needle!) Q: Can the Butt Buoy be inflated with an air compressor? A: Yes, but it is not recommended, as the Butt Buoy inflates rather quickly. And you never want to over inflate. Q: What happens if I over inflate my Butt Buoy? A: The Butt Buoy will lay on its side and will not float as it is intended. Q: How much should I inflate my Butt Buoy? A: The Butt Buoy floats best when it is barely inflated. The Bottom of the Butt Buoy should look flat. Like the bottom of a rubber ducky. Q: How should I clean my Butt Buoy? A: Your Butt Buoy should be cleaned with a mild detergent and warm water. (Simple Green works great!) Q: Are there any other uses for my Butt Buoy? A: Yes, people have used the Butt Buoy to hold their swimming pool thermometers in their swimming pools and spas. Q: What size is the Butt Buoy? A: The Butt Buoy is approximately 12 inches in diameter and 8 inches tall. Q: Does the Butt Buoy come with a bathing suit? A: Yes, you get your choice of color when you order. You can also customize your buoy with any suit!..Read More

Jim-Buoy Deluxe Horseshoe Buoy..Read More

The ideal buoy or fender for a variety on applications...Read More

• Swim Course Marker Buoy - 40"
• Easily inflatable - Rugged, durable design - Made of 16 gauge P.V.C. vinyl - Easily seen from long distances

These buoys are 40" tall are are used for calm waters or as support buoys. Used for open water swimming as well as triathlon swim courses.- Easily inflatable- Rugged, durable design- Made of 16 gauge P.V.C. vinyl- Easily seen from long distances- Used to mark triathlons, open water swims and other water sports..Read More

..Read More

The ideal buoy or fender for a variety on applications...Read More

Throw line to attach to Ring Buoy for safe deployment..Read More

Tougher than traditional foam buoys, these durable mooring buoys are constructed from rotational molded hard plastic. Galvanized eye bolts run through the center of the buoy. The unique design allows all hardware to be recessed in the buoy to prevent damage to your boat...Read More

High density foam assures lasting durability. All hardware is hot-dipped galvanized medium carbon steel. Eye bolts are molded into buoy, resulting in no loss of flotation. Rubber bumpers give added protectionupon contact. All buoys are coated with an exterior coating that resists extreme weathering, most chemicals and fuels. 12" diameter and height with a 1/2" swivel 30 lb. buoyancy and weight..Read More

High density foam; rubber bumpers. coated with CJ-19, weather chemical and fuel resistant. Eye bolts are molded into buoy resulting in no lose of flotation. 1/2'' dia. 1/2'' swivel and eye. 62 lbs. buoyancy. White, permanent blue stripe...Read More

• Ideal for larger boats and rafting
• Heavy-duty seamless construction
• Ends made from injection-molded vinyl
• 2000 psi tensile strength
• Curved design hole prevents chafing

Ideal for larger boats and rafting, Tuff End™ buoys feature heavy-duty seamless construction. Fender ends are made from injection-molded vinyl tested to an industry-leading 2000 psi tensile strength. Large line holes accept standard shackles. The curved design hole prevents chafing. Trivalve™ located on the side of the buoy for easy inflation with a football needle or compressor...Read More

New marker buoy in thicker bonded PVC...Read More

Durable, galvanized mooring ring...Read More

• Even wall thickness for maximum strength and durability
• The only truly one piece buoy still made.
• Polyform's unique vinyl valve system - the industry's best and most reliable.
• Primary use is as a mooring or marker buoy. Also makes a great fender for boats to 50'.
• Measures 17" x 23" when inflated

The ideal buoy or fender for a variety on applications...Read More

• Feature large line holes that will accept most ropes and standard shackles
• Injection molded ends tested to 2000 psi tensile strength
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless construction, the strongest in the industry

TUFF END INFLATABLE VINYL BUOYS are excellent for fenders, mooring buoys or markers. Eye end of fender is solid vinyl for extra strength. Built-in bivalve for easy inflation/deflation. Bivalve offers needle valve for football-type hand pump inflation or unscrews and removes for large aperture pumps or quick deflation. Patent pending. Recommended inflation is 2 psi. Diameter - 12". Buoyancy - 30#. Orange...Read More

"Dock Edge, Inc Mooring Buoy Swivel, 8.5"" Rod. Hot dip galvanized. 7-1/2"" center rod."..Read More

• high quality
• POLYFORM WATER SKI SLALOM BUOY YELLOW
• Unique design.

The WS Series waterski marker buoys are an excellent choice for visibility and durability. The Slalom Buoy is made of high quality PVC and features a strong ropehold; this buoy is built to last for a long time. Meets American Waterski Association specifications for record capability tournaments...Read More

• Dock Edge 90030F

Flared Galvalume collar to prevent chain wear or chaffing. One piece, weld-free construction and corrosion resiCOLLAR, MOORING BUOY, 1 7/8 X stance you can rely on to last and last. Fits 1-7/8 inch diameter (2 inch nominal) collar/spindle openings. Galvalume steel alloy has 10X the corrosion resistance of hot-dipped galvanized steel...Read More

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

..Read More

..Read More

Taylor Made Sur - Mark Marker Buoy gets the message out there loud and clear. The clear way to communicate . The Taylor Made Sur-Mark Regulatory Buoy is molded from tough UV protected polyethylene for serious visibility and durability. Simply attach the graphics (sold below) and set it out for use. Details: 1-Pc. seamless construction; Internal concrete ballast; Recessed galvanized eye; Stands upright for storage; Visible Height above waterline: 39"; Column diameter approx. 10", base diameter approx. 18"; Approx. buoyancy: 40 lbs.; Sur-Mark Buoy Label details: Fade resistant, self-adhesive vinyl marker labels; Brightly colored for high visibility; Each label approx 13 x 24" to fit either Sur-Mark or Sur-MarkII Buoys; Sold in pairs (two labels required per buoy).; Get the message out there! Order Today! Taylor Made Buoy Label, NO SWIMMING..Read More

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

• High Density foam assures lasting durability.
• All hardware is hot-dipped galvanized medium carbon steel.
• Eyebolts are molded into buoy, resulting in no loss of floatation.
• Rubber bumpers give added protection in contact.
• Coated with an exterior coating that resists extreme weathering, most chemicals and fuels.

12" Diameter / 12" Height / 1/2 Swivel & Eye / 30lb Buoyancy..Read More

..Read More

• 2 1/4"
• Mounts easily to wood surfaces.
• Durable galvanized mooring ring

Durable, galvanized mooring ring...Read More

Cal June 24 Orange Life Ring Buoy W/O Strap. USCG approved. GX models have no straps to wear out and the rope is looped and securely bonded inside the molded core. Comes with rope molded into core. Solid closed cell...Read More

Cal June 24 White Life Ring Buoy W/O Strap. USCG approved. GX models have no straps to wear out and the rope is looped and securely bonded inside the molded core. Comes with rope molded into core. Solid closed cell...Read More

Lightweight & durable PVC inflatable buoys to mark slalom course in accordance w/AWSA specifications. Molded-in loop to fasten anchor line. Contains an inflation valve for air pressure adjustment. 9'' diameter...Read More

• Cover gives years of protection shielding out rain and debris.
• The shock cord gives a snug, tight fit.
• Marine grade polyester blend

ABT102CVGY Features: -Color: Gray. Made of a durable marine grade polyester blend, this cover gives years of protection, shielding out rain and debris. -Dimensions: 8.25'' H x 55'' W x 122'' D...Read More

• Fade resistant, self adhesive vinyl marker label
• Brightly colored for high visibility
• Each label is 13" x 24" long
• Sold in pairs
• 5 Year Warrantee against weathering or fading

..Read More

..Read More

100% safe & secure shopping; Superior customer service...Read More

• ANCHOR SYSTEM.
• The 3-1/3 pound 4-fluke folding anchor will hold in mud, sand, gravel and rock.
• Its designed for boats, sailboats, personal watercraft, inflatable boats, canoes and float tubes.
• A 25 ft. long marine-grade rope, with an in-line buoy.
• This item has high quality with reasonable price.

Exceptional customer service and unparalleled product expertise...Read More

• MOORING BUOY, 24X8, ORG, LLDPE.
• Resistant to fire, oil and gas. Molded in UV Inhibitors and Fungicides.
• Polyethylene and filled with closed cellular foam for long life under the most extreme marine conditions.
• 100% safe & secure shopping; Superior customer service.
• This item has high quality with reasonable price.

Manufactured to the Highest Quality Available...Read More

Durable, vinyl coated buoy has a fiberglass pick-up pole extending skyward with a vinyl coated lead counterweight for balance. These mast buoys should be tied to the pennant of a mooring rig - after the mooring ball. Makes retrieving any mooring line safe and easy, no need for a boat hook...Read More

Jim-Buoy Standard Horseshoe Buoy..Read More

Taylor Made Sur - Mark Marker Buoy gets the message out there loud and clear. The clear way to communicate . The Taylor Made Sur-Mark Regulatory Buoy is molded from tough UV protected polyethylene for serious visibility and durability. Simply attach the graphics (sold below) and set it out for use. Details: 1-Pc. seamless construction; Internal concrete ballast; Recessed galvanized eye; Stands upright for storage; Visible Height above waterline: 39"; Column diameter approx. 10", base diameter approx. 18"; Approx. buoyancy: 40 lbs.; Sur-Mark Buoy Label details: Fade resistant, self-adhesive vinyl marker labels; Brightly colored for high visibility; Each label approx 13 x 24" to fit either Sur-Mark or Sur-MarkII Buoys; Sold in pairs (two labels required per buoy).; Get the message out there! Order Today! Taylor Made Buoy Label, DANGER..Read More

Cal-June Horseshoe Buoys with integrated anchors to slow wind drift. Horseshoe buoys are U shaped USCG approved emergency flotation and rescue devices...Read More

HARD SKIN SUR-MOOR MOORING BUOYS have thick one piece outer shell molded of high density polyethylene filled with solid closed-cell foam. Puncture proof and almost indestructible. Fittings, swivels and rings are hot dipped galvanized for added years of service. Three year warranty. Diameter - 12 Inch. Buoyancy - 30 pounds. Shape - Round. Blue Stripe...Read More

This item has high quality with reasonable price...Read More

• Swivel & Eye" 1/2
• Height" 12
• Diameter" 12
• Buoyancy 30 lbs.

Deluxe Series, White/Blue Stripe. Features High Density Foam Which Assures Lasting Durability. All Hardware Is Hot-Dipped Galvanized Medium Carbon Steel. Eye Bolts Are Molded Into Buoy, Resulting In No Loss Floatation. Buoy Is Coated With Cj-19, An Exterior Coating That Resists Extreme Weathering, Most Chemicals And Fuels.
Diameter\: 12
Height\": 12
Swivel & Eye\": 1/2
Buoyancy: 30 Lbs.
Diameter\": 12
Height\": 12
Swivel & Eye\": 1/2
Buoyancy: 30 Lbs.
Part Number(s): CAL 421 CAL-421 CAL_421 CAL421 58-421 "..Read More

• Feature large line holes that will accept most ropes and standard shackles
• Injection molded ends tested to 2000 psi tensile strength
• Tri-valve for easy inflation with football needle or compressor
• Constructed from flexible and resilient marine grade vinyl
• Tuff End fenders feature a seamless construction, the strongest in the industry

Tuff End buoys feature heavy duty seamless construction to meet the punishing demands of the commercial marine industry. Trivalve for easy inflation with football needle or compressor. Recommended inflation is 2 psi...Read More

• PREM MOORING WHIPS 16FT 2/BOX.
• 100% safe & secure shopping; Superior customer service.
• This item has high quality with reasonable price.
• Manufactured to the Highest Quality Available.
• The design of this product is very exquisite and beautiful.

Exceptional customer service and unparalleled product expertise...Read More

12" Diameter / 36" Height / 1/2 Swivel & Eye / 126lb Buoyancy..Read More

Fade resistant, self adhesive vinyl marker labelBrightly colored for high visibilityEach label is 13' x 24' longSold in pairs5 Year Warrantee against weathering or fading..Read More

• HUGE FLOATATION BASE - 12" high x 30" diameter size assures upright floatation
• 2" WIDE ALUMINUM BAND - Protects base of buoy from jet-skis and boat crashes (optional)
• CJ-37 ROCK HARD OUTER SHELL - Resists the hardest blows - almost indestructible!
• CHOOSE DECALS/DAYMARKS - E-mail us after purchase to request daymarks other then the one pictured.
• ABOVE WATER LINE - 80"

Jim Buoy's all new Sombrero Buoy is designed to be used where maximum stability and buoy strength are of prime importance. With the addition of the 2" wide aluminum protection band (optional) on the top edge of the jumbo flotation base, the Sombrero Buoy can withstand jet-skis and boat crashes that might otherwise permanently damage or tip over a standard buoy. In addition to positive, upright floatation, the large 12" high x 30" diameter base provides greater visibility because it naturally floats higher in the water! A galvanized external ballast may be ordered for some models - other ballast are internal, however (some weights may be necessary to add to the chains if a shallow condition exists). All colors are impregnated and molded into the tough CJ-37 Rock Hard outer shell for years of rugged maintenance free service. Eye bolts and metal components are galvanized steel for greater strength and resistance to rust and corrosion...Read More

• Perfect for any fisher
• Enjoy fishing safely
• Easy to secure and release
• Easy assembly
• Harness Buoy with blaze orange buoy and 20' dumpline. Securely connects any drift sock to your boat

Harness Buoy connects any drift sock to your boat. Has a rubber coated stailess steel clip makes it easy to secure and release. Blaze orange buoy will be sure to get the attention needed. Also comes with a 20' dumpline making this piece a perfect addition to any boat...Read More

• POLYFORM A4RED

The A-Series is the product that launched the Polyform story. This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task. That's why more fishermen use Polyform A-Series than all other buoys combined. You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.

Features:

Even wall thickness for maximum thickness

Heavy duty reinforced ropeholds

Polyform's unique vinyl valve system

Redesigned ropehold for A-1 through A-7 for improved strength and durability

Dual valve inflation/deflation system for sizes A-5, A-6 & A-7

Excellent rafting fender choice

Offered in seven brilliant high-visibility colors

Size: 21.5 x 28 in

Eye Diameter: 1.0 in

Circumference: 67.5 in

Buoyancy Ratings: 187 lbs..Read More

• Discourages sea gulls from landing
• UV-resistant polypropylene
• Inexpensive way to protect costly pilings from internal rot
• 3-1/2 inch x 3-1/2 inch
• Available in other colors

Piling caps are the most excellent, inexpensive way to protect costly pilings from internal rot. The "Conehead" design helps discourage sea gulls from landing. Made from heavy UV-resistant, low-density, long-life polypropylene...Read More

• Fade resistant, self adhesive vinyl marker label
• Brightly colored for high visibility
• Each label is 13" x 24" long
• Sold in pairs
• 5 Year Warrantee against weathering or fading

Fade resistant, self adhesive vinyl marker labelBrightly colored for high visibilityEach label is 13' x 24' longSold in pairs5 Year Warrantee against weathering or fading..Read More